Shenzhen Tiancheng Lighting Limited company to welcome you！ National Service Hotline：4008-320-328
| Shooting lamp replace LED lamp bead |
| Time:2022-10-09 00:00:00 | view： |
|
Hello everyone, I am Xiaobian Rong, today, let ’s introduce the problem of how to replace the LED lamp bead LED shooting lights. The following is the summary of this issue and related issues. Let’ s take a look. Catalog of the article:1. How to replace the LED lamp beads of the spotlight 2. How to change the LED shooting lamp beads 3. How to repair the LED lamp beads if the light beads are broken 4. How to remove the LED shooting light beads 5 、老式射燈怎么改成led燈射燈的led燈珠壞掉了怎么更換 首先要看吊頂上的射燈是一體的，還是分開(kāi)的。 If you are a separate light bulb, you can change the LED light bulb or the spotlight. If it is integrated, you need to change it as a whole. You cannot change the bulb alone. The traditional ranger light source is high, high in heat, and also consumes power. LED lights have high brightness, high heat and power saving, saving, and safer.How to change the LED shooting lamp beads remove the shell of the LED lamp down. The new lamp beads are welded and fixed
LED lamp bead replacement operation steps are as follows: First of all, after the power generation switch is turned on for 25-30 seconds, the constant temperature heating table can be used. Raising the temperature to 50 ± 10 ° C. This temperature interval has a brief heating LED aluminum substrate or the LED light source lamp with the glass fiber plate material. On the left and right, after the tin paste of the lamp beads is melted, you can easily use the beads to change the lamp beads. First use the mule to remove the bad lamp beads one by one, and then put the prepared lamp beads (you can advance from some abandoned LED light sources in advance. Remove the lamp beads and turn waste into Baodang as a spare lamp bead). It should be noted that when changing the lamp beads, pay attention to the+-positive and negative electrode direction of the LED lamp beads. The technique of the problem is how to arrange the adjacent lamp beads. Finally, after changing the lamp beads, remove the maintenance site and remove the heating platform for 3-5 seconds. After the LED aluminum substrate or glass fiber plate is cooled and cools down, the tin paste solidified and automatically welded the lamp bead. Precautions 1. The heating platform and the parts of the part of the contact during the maintenance process are high temperature. Do not touch it to avoid burns. Pay attention to the operation of operation. 3. Double -sided available on the heating table can be selected according to the actual situation of the LED lamp board. LED shooting lamp beads How to remove the lamp beads Put the lamp board first, wipe the silicon grease of the back of the lamp plate, and then put the lamp plate on the heating table to heat it up. The temperature of the welding table is generally adjusted to more than two Baidu. When the tin melting, the lamp beads can be removed. In addition to the pins, the bottom heat dissipation part is also welded on the lamp plate. Therefore, the welded lamp beads must be heated under the lamp board to remove it. How to change the LED light for the old -fashioned shooting lights Convert the lamp head of the old -fashioned shooting light to the LED lamp head, and then install the LED light bulb The above is the Tiancheng Xiaobian replaced the LED lamp bead for the shooting light. How to change the LED shooting lights and answers the questions and related questions, I hope it is useful to you [Responsible editor: Sister Rong] |
